EUmark Set 02 — Electrochemical Marking System with Stencil Printer

EUmark Set 02 — marking system with 58 mm stencil printer

The mark itself takes seconds. Waiting for a stencil for content you have never marked before takes days — unless the printer sits on the same bench. Set 02 removes that wait for the full machine: black oxide marking, deep etch, and the ability to print your own stencils.

What the P58D printer is built for

The 58 mm printer produces clean text, part numbers, date codes and fine line artwork. Thin strokes and outline logos reproduce well at this width.

It is not built for machine-readable symbols. QR codes, barcodes, thick strokes and large solid black areas should be avoided — they do not transfer reliably at 58 mm. Where scannable codes are required, Set 04 (SUPER SET) uses the wider printer and the software built for it.

Two marking modes

• Black oxide marking — shallow, high-contrast dark mark.
• Deep etch, light marking — recessed, with real depth, for marks that must survive further finishing or years of wear.

Set 06 is the direct comparison at a lower price: same printer, compact machine, black oxide marking only. The choice between them is whether depth will ever be required.

Kit contents

• EUmark marking unit, 110 V / 220 V, with power and marking cables
• Stencil printer P58D, 58 mm print width
• Stencil design software, included, optimised for text and fine lines
• 1 × stencil tape
• Hand stamp, marking felt
• Electrolytes M21, M22, M23 and N11 Neutralyte
• Sample long-life stencil and sample printed stencil

Set 02 ships with one roll of tape. Set 03 is the same system with six rolls and a second marking felt — a working stock rather than a starting sample, for a small difference in price.

Materials — including aluminium

Works on any conductive metal. Aluminium is the one exception worth flagging: it forms a non-conductive oxide layer almost immediately in air, which produces a grey, muted mark rather than a dark one, and many aluminium alloys contain magnesium and silicon that complicate this further. Tell us the alloy and we will confirm the approach before you order.

The four fluids

Fluid	Behaviour	Use it when
M21	Self-cleaning, many marks per wetting	Batch runs without stopping to re-wet
M22	Very dark, used for deep etch; felt needs washing after use	Maximum contrast or specified depth
M23	Non-corrosive; wipe dry after marking	Corrosion-sensitive materials
N11 Neutralyte	Protects the surface after etching	Standard step after M21 or M22

Each fluid ships with a safety data sheet. A 200 ml bottle delivers up to 20,000 marks. The table is a recommendation — trial marking on your material is required, and we will run the first one for you on request.

Specifications

Process	Electrochemical marking, AC and DC
Marking modes	Black oxide marking and deep etch
Stencil printer	P58D, 58 mm — text, numbers and fine lines
Mains supply	110 V / 220 V AC, ready for EU, UK and US
Output voltage	10–15 V
Maximum output current	15 A
Power consumption	up to 150 W at peak
Marking cycle	2–5 seconds per mark
Marking unit dimensions	160 × 160 × 65 mm
Warranty	24 months
Manufacture	EUmark, Serbia — since 1999

Delivery within the EU and UK

Ships from Serbia under SAA preferential origin — EUR.1 or invoice declaration accompanies every shipment, EU and UK alike.

Before you order

Send the alloy, geometry, marking content and volume, and we will confirm whether Set 02 fits or whether Set 03 or SUPER SET 04 serves you better. eumark@eumark.de